Rubber Hose and Tubing

NewAge Industries
Fluid Transfer Specialists
SILBRADE® MEDICAL
medical grade silicone hose  Medical Grade Braid Reinforced Silicone Rubber Hose
  • Open mesh polyester braiding incorporated within the wall of silicone tubing
  • Silicone elastomer meets USP Class VI and NSF-51 requirements
  • Translucent natural color for visual contact with the flow
  • Able to resist extreme temperature variation: -80°F to 350°F
  • Odorless, tasteless, and inert
  • All ingredients are non-toxic and FDA-sanctioned for use with food contact surfaces
  • Manufactured under strict Good Manufacturing Procedures in a controlled environment

Physical Properties**
Hardness, Shore A ±5 - Core 70
Hardness, Shore A ±5 - Cover 60
Tensile Strength, psi 1000
Elongation at Break, % 350
Brittle Temperature -80°F
Max. Operating Temperature 350°F

**Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for the application.

COMPLETE PRODUCT LISTING
CLICK HERE FOR SILBRADE MEDICAL
MEDICAL GRADE SILICONE HOSE
PART NUMBERS & SPECIFICATIONS

 

  Notes

SILBRADE MEDICAL's construction consists of a core of silicone elastomer, an open polyester braid reinforcing layer, and a cover layer of silicone elastomer. Good Manufacturing Procedures, including lot traceability, are applicable to all Class VI ingredients. It is a peroxide-cured product.

The hose's smooth bore, coupled with its resistance to allow material to adhere to the tube wall, facilitates easy cleaning and system purging.

SILBRADE MEDICAL may be low pressure sterilized in-line or autoclaved up to 250°F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, will eventually relax and become gummy. It should then be replaced.

Care is recommended in the selection and application of fittings and clamps for SILBRADE MEDICAL, as extremely sharp barbs or unlined clamps could tear into the wall and possibly cause a failure, especially at elevated pressures.

Peroxide cured SILBRADE MEDICAL hose is supplied in individual, non-sterile, heat sealed polybags and should be sterilized prior to use.

A platinum-cured, braid-reinforced medical grade silicone hose is available.Minimum quantities apply; call for price and delivery.

Note: SILBRADE MEDICAL is not recomended for implantable or in-body uses.

NewAge Rubber Hose and Tubing Products
Latex
Newtex
Natural latex rubber tubing
Silicone
Silcon®
Silicone tubing
Silbrade®
Braid reinforced hose
Silcon® Medical
Medical & pump grade tubing
Silbrade® Medical
Braid reinforced medical grade hose
Silcon® Med-X
Platinum cured medical grade tubing
Silvac®
Polyester & wire reinforced silicone suction hose
TPR
Suprene®
Thermoplastic rubber tubing


High Purity Silicone Tubing and Hose Products
sanitary tubing and hose products

Our AdvantaPure division specializes in products for the biomedical, pharmaceutical, and biotechnology industries. Visit our Web site at:


HOME | PRODUCTS | ABOUT US | REFERENCE TOOLS | CONTACT US


We Are Your "Fluid Transfer Specialists®"
For Experienced Technical Support Contact Us At:
Phone: 800-506-3924 or 215-526-2300
Fax: 800-837-1856 or 215-526-2190
E-mail: info@newageindustries.com

NewAge® Industries, Inc., 145 James Way, Southampton, PA 18966-3817

Trademarks & Legal Notices
Copyright © 1999 - 2014 NewAge® Industries, Inc.