Rubber Hose and Tubing

NewAge Industries
Fluid Transfer Specialists
SILBRADE®
silicone hose

 Braid Reinforced Silicone Rubber Hose
  • Open mesh polyester braiding incorporated within the wall of silicone silicone tubing
  • Made from FDA-sanctioned ingredients
  • Translucent natural color for visual contact with the flow
  • Able to resist extreme temperature variation: -80°F to 350°F
  • Odorless, tasteless, and inert
  • Excellent weatherability properties -- resists U.V., ozone, gases, moisture, and extreme temperatures
  • Offers far higher pressure capabilities than similarly-sized unreinforced silicone tubing
  • Listed by the National Sanitation Foundation (NSF 51) for food equipment materials

 

Physical Properties**
Hardness, Shore A ±5 - Core 70
Hardness, Shore A ±5 - Cover 60
Tensile Strength, psi 1000
Elongation at Break, % 350
Brittle Temperature -80°F
Max. Operating Temperature 350°F

**Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for the application.

COMPLETE PRODUCT LISTING
CLICK HERE FOR SILBRADE
SILICONE HOSE
PART NUMBERS & SPECIFICATIONS

 

  Notes

The construction of SILBRADE enables silicone tubing to handle increased pressure applications. SILBRADE offers outstanding resistance to temperature extremes and is made from FDA-sanctioned ingredients.

The flexible design and construction of SILBRADE allows excellent bend radii and permits installation in restricted spaces without impeding flow.

SILBRADE, a peroxide-cured product, contains no sulphur or other acid-producing chemicals thereby eliminating the possibility of staining, corroding, or deteriorating other materials it contacts. It is also resistant to ozone and U.V. over long time periods.

Care is recommended in the selection of fittings and clamps, as sharp barbed fittings or unlined metal clamps could tear into the hose wall and possibly cause a failure, especially at elevated pressures.

SILBRADE may be low pressure steam sterilized in-line or autoclaved at up to 250°F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced.

NewAge Rubber Hose and Tubing Products
Latex
Newtex
Natural latex rubber tubing
Silicone
Silcon®
Silicone tubing
Silbrade®
Braid reinforced hose
Silcon® Medical
Medical & pump grade tubing
Silbrade® Medical
Braid reinforced medical grade hose
Silcon® Med-X
Platinum cured medical grade tubing
Silvac®
Polyester & wire reinforced silicone suction hose
TPR
Suprene®
Thermoplastic rubber tubing


High Purity Silicone Tubing and Hose Products
sanitary tubing and hose

Our AdvantaPure division specializes in products for the biomedical, pharmaceutical, and biotechnology industries. Visit our Web site at:


HOME | PRODUCTS | ABOUT US | REFERENCE TOOLS | CONTACT US


We Are Your "Fluid Transfer Specialists®"
For Experienced Technical Support Contact Us At:
Phone: 800-506-3924 or 215-526-2300
Fax: 800-837-1856 or 215-526-2190
E-mail: info@newageindustries.com

NewAge® Industries, Inc., 145 James Way, Southampton, PA 18966-3817

Trademarks & Legal Notices
Copyright © 1999 - 2014 NewAge® Industries, Inc.